XzioX Mixing Instructions

XzioX mixing Instructions

XzioX Chlorine Dioxide solution is made by adding Component B to Water then adding Component A

In simple terms the quantities should be as follows 5% volume=B + 90% volume=water + 5% volume=A

Quantities are made up as follows

1 Litre of XzioX solution = 50ml of B + 900ml of Water + 50ml of A
10 Litres of XzioX solution = 500ml of B + 9 Litres of Water + 500ml of A
100 Litres of XzioX solution = 5 Litres of B + 90 Litres of Water + 5 Litres of A
500 Litres of XzioX solution = 25 Litres of B + 450 Litres of Water + 25 Litres of A

So to make 1 Litre of CLO2 at 0.35% (3500ppm), please follow the instructions below.

Always read the MSDS before use.

  • 1. Add component B to 900ml of water in suitable vessel
  • 2. Then add activator component A.
  • 3. Seal black bottle.
  • 4. Gently agitate.
  • 5. Wait 1 hour.
  • 6. Gently agitate before decanting/use.
  • 7. Please note XzioX activator (A) should be stored at no less than 10 degrees Celsius.